Batteries 100AH LIFEPO4 autochauffante
Batteries 100AH LIFEPO4 autochauffante
This 100Ah 12V Heated LiFePO4 Deep Cycle Battery Kit by Battle Born Batteries delivers superior and long-lasting performance! Equipped with a proprietary, low draw internal heating technology, this battery is ready to charge and provide superior power no matter the cold weather you may face.
- Drop-In Replacement for Group 27 & 31 batteries
- Designed for Versatility with the ability to be wired in series or parallel and mounted in any orientation
- Safe & Reliable lithium iron phosphate (LiFePO4) chemistry
- Rugged Battery Design built for RV, camper van, boat, trolling motor, industrial, off-grid, and residential backup applications
- Lightweight at just 31 pounds for 100Ah of usable power power
- Long-Lasting with 3,000-5,000 deep discharge cycles providing up to 10-15 years of power
- Internal BMS featuring low temperature protection, high and low voltage, short circuits, and more
Internal Heat Technology:
- Proprietary internal heating capabilities
- Operating Temp Range:-4°F to 135°F
- Heat activated when internal temperature reaches ~35°F (and heat function is enabled)
Accepted Voltages:
- Charging voltage: 14.2 – 14.6 V
- Float voltage: 13.4 – 13.8 V
Dimensions (L x W x H):
- 12.76 x 6.86 x 8.95 in.
Ships With:
- 18-8 stainless steel 5/16 – 18 1” and 1-1/4” bolts
- Brass washers
- 18-8 stainless steel nuts with nylon inserts
Items in Each Heated Battery Kit Include:
- 1 -SPST Rocker Switch
- 1 -25’ 18 AWG wire terminated with 0.187 QD and #8 ring lug
- 1 -25’ 18 AWG wire terminated with 0.187 QD and 5/16 ring lug
- 1 – Jumper wire (For use if you are installing more than one heat-enabled battery model):
- 1 -14-inch 18 AWG wire terminated with two #8 ring lugs
- 2 -M4 x 5mm long Philip head screws
- 1 -#8 ring lug
- 1 -1-inch piece of shrink wrap
Please Note: A CSL is required for use with inverters 3500W or higher.
This 100Ah 12V Heated LiFePO4 Deep Cycle Battery Kit by Battle Born Batteries delivers superior and long-lasting performance! Equipped with a proprietary, low draw internal heating technology, this battery is ready to charge and provide superior power no matter the cold weather you may face.
- Drop-In Replacement for Group 27 & 31 batteries
- Designed for Versatility with the ability to be wired in series or parallel and mounted in any orientation
- Safe & Reliable lithium iron phosphate (LiFePO4) chemistry
- Rugged Battery Design built for RV, camper van, boat, trolling motor, industrial, off-grid, and residential backup applications
- Lightweight at just 31 pounds for 100Ah of usable power power
- Long-Lasting with 3,000-5,000 deep discharge cycles providing up to 10-15 years of power
- Internal BMS featuring low temperature protection, high and low voltage, short circuits, and more
Internal Heat Technology:
- Proprietary internal heating capabilities
- Operating Temp Range:-4°F to 135°F
- Heat activated when internal temperature reaches ~35°F (and heat function is enabled)
Accepted Voltages:
- Charging voltage: 14.2 – 14.6 V
- Float voltage: 13.4 – 13.8 V
Dimensions (L x W x H):
- 12.76 x 6.86 x 8.95 in.
Ships With:
- 18-8 stainless steel 5/16 – 18 1” and 1-1/4” bolts
- Brass washers
- 18-8 stainless steel nuts with nylon inserts
Items in Each Heated Battery Kit Include:
- 1 -SPST Rocker Switch
- 1 -25’ 18 AWG wire terminated with 0.187 QD and #8 ring lug
- 1 -25’ 18 AWG wire terminated with 0.187 QD and 5/16 ring lug
- 1 – Jumper wire (For use if you are installing more than one heat-enabled battery model):
- 1 -14-inch 18 AWG wire terminated with two #8 ring lugs
- 2 -M4 x 5mm long Philip head screws
- 1 -#8 ring lug
- 1 -1-inch piece of shrink wrap
Please Note: A CSL is required for use with inverters 3500W or higher.
- Le choix d'une sélection entraîne l'actualisation de la page entière.
- S'ouvre dans une nouvelle fenêtre.